| Model Family | Bradford White RG250T6X Defender Safety System™ |
| Fuel Type | Propane (LP) Gas |
| Tank Capacity | 50 gallons (nominal) |
| DOE Rated Storage | ~48 gallons |
| BTU Input | ~35,000 – 36,000 BTU/hr |
| Uniform Energy Factor (UEF) | ≈ 0.62 – 0.63 |
| Recovery Efficiency | Up to ~80 % |
| First Hour Delivery | ~81 – 89 gallons |
| Recovery at 90°F Rise | ~41 GPH |
| Ignition Type | Piezo (manual) |
| Venting | Atmospheric |
| Vent Size | 3" or 4" (Snap-Lock draft diverter) |
| Water Connections | 3/4" NPT |
| Gas Connection | 1/2" |
| Pressure Rating | 150 psi typical |
| Dimensions (Approx.) | ~60 – 60.125" H × 22" diameter × ~25.5" D |
| Weight (Empty) | ~154 – 164 lbs |
| Insulation | Non-CFC foam |
| Anode Rod | Protective magnesium (configuration dependent) |
| Tank Lining | Vitraglas® enamel |
| Safety System | Defender Safety System® / ScreenLok® flame arrestor |
| Energy Star | No |
| Ultra-Low NOx Certified | No (standard emissions) |
| Typical Application | Residential |
The Bradford White RG250T6X is a Liquid Propane, 50 gallon hot water heater. This tank is 60-1/8″ from the floor to the Flue Connection and the jacket diameter is 22″ wide. Featuring an input of 35,000 BTUs, this hot water heater has a First Hour Rating or First Hour Delivery of 81 gallons.
Basically, the First Hour Rating means how much hot water the hot water heater can deliver in an hour of use, starting with a fully heated tank. It does not mean that the hot water will last for one hour. As the cold water enters the tank it is heated, the faster you use your hot water, the faster your water will become tepid and then cold. However, depending on your temperature set point and your household’s water use you can calculate how much hot water you need during your busiest hour. As you use the water in the tank, it is continuously being replenished and heated.
The Uniform Energy Factor (UEF) is used to determine the energy efficiency of the hot water heater. Recover efficiency, stand-by loss and cycling loss are all included in the energy factor. Typically, the higher the energy factor, the more efficient the water heater. Cost of fuel however, will have an impact on annual operating costs.
Features
- Proprietary algorithms provide enhanced first hour delivery ratings and tighter temperature differentials
- Microprocessor controls burner operation for consistent and accurate water temperature levels up to 160 deg F (71 deg C)
- Exclusive multi-color LED light indicates operation status/service required
- Designed to be the safest, most reliable flammable vapor ignition-resistant system in the industry with a proven track record since 2003
- Flame arrestor is designed to prevent ignition of flammable vapor outside of the water heater
- Proven and reliable bi-metallic switch prevents burner and pilot operation in case of ongoing flammable vapors burning inside of the combustion chamber or restricted air flow
- No regular cleaning of air inlet openings or flame arrestor is required under normal conditions
- Offers a view into the combustion chamber to observe the operation of the pilot and burner
- An exclusively engineered enamel formula that provides superior tank protection from the corrosive effects of water and with Microban® antimicrobial product protection to help prevent the growth of bacteria, mold and mildew on the surface of the tank lining
- Sediment reducing device that also increases first hour rating of hot water while minimizing temperature build-up in tank
- NPT factory installed dielectric waterway with heat traps
- Provides added protection against corrosion for long-term, trouble-free service
- Durable tamper-proof design
Item Attributes
| Brand Code: | Bradford White |
|---|---|
| Part Number: | RG250T6X |
| GTIN14: | 671632794645 |
| Category Code: | Water Heaters |
| Sub Category Code: | Water Heaters |
Bradford White 50 Gallon 35 000 Btu Defender Safety System Atmospheric Vent Energy Saver Residential Water Heater (lp Gas) RG250T6X
- SKUI-0000097333
- Model #RG250T6X
| Condition | New |
|---|---|
| Type | ![]() |
| Grade | A |
| Product Source | ![]() |
| Additional Info | New In Box |
| Available Quantity | 1 |
7 DAY RETURNS ON ALL PRODUCTS
FAST Nationwide Shipping (Ships Same/Next Business Day)
Same Day Pick Up (Fort Lauderdale FL).
Same Day | Next Day Local Delivery Available.
Flexible Delivery — Hold Up to 90 Days
Not ready yet? We'll delay shipping your order for up to 90 days.
| Brand | Bradford White |
|---|---|
| Category | Water Heaters |
| Model Number | RG250T6X |
| UPC/GTIN | 671632794645 |
| Capacity | 50.0000 |
| Depth | 25 1/2 |
| Width | 25 1/2 |
| Height | 60 1/8 |
| Model Family | Bradford White RG250T6X Defender Safety System™ |
| Fuel Type | Propane (LP) Gas |
| Tank Capacity | 50 gallons (nominal) |
| DOE Rated Storage | ~48 gallons |
| BTU Input | ~35,000 – 36,000 BTU/hr |
| Uniform Energy Factor (UEF) | ≈ 0.62 – 0.63 |
| Recovery Efficiency | Up to ~80 % |
| First Hour Delivery | ~81 – 89 gallons |
| Recovery at 90°F Rise | ~41 GPH |
| Ignition Type | Piezo (manual) |
| Venting | Atmospheric |
| Vent Size | 3" or 4" (Snap-Lock draft diverter) |
| Water Connections | 3/4" NPT |
| Gas Connection | 1/2" |
| Pressure Rating | 150 psi typical |
| Dimensions (Approx.) | ~60 – 60.125" H × 22" diameter × ~25.5" D |
| Weight (Empty) | ~154 – 164 lbs |
| Insulation | Non-CFC foam |
| Anode Rod | Protective magnesium (configuration dependent) |
| Tank Lining | Vitraglas® enamel |
| Safety System | Defender Safety System® / ScreenLok® flame arrestor |
| Energy Star | No |
| Ultra-Low NOx Certified | No (standard emissions) |
| Typical Application | Residential |
The Bradford White RG250T6X is a Liquid Propane, 50 gallon hot water heater. This tank is 60-1/8″ from the floor to the Flue Connection and the jacket diameter is 22″ wide. Featuring an input of 35,000 BTUs, this hot water heater has a First Hour Rating or First Hour Delivery of 81 gallons.
Basically, the First Hour Rating means how much hot water the hot water heater can deliver in an hour of use, starting with a fully heated tank. It does not mean that the hot water will last for one hour. As the cold water enters the tank it is heated, the faster you use your hot water, the faster your water will become tepid and then cold. However, depending on your temperature set point and your household’s water use you can calculate how much hot water you need during your busiest hour. As you use the water in the tank, it is continuously being replenished and heated.
The Uniform Energy Factor (UEF) is used to determine the energy efficiency of the hot water heater. Recover efficiency, stand-by loss and cycling loss are all included in the energy factor. Typically, the higher the energy factor, the more efficient the water heater. Cost of fuel however, will have an impact on annual operating costs.
Features
- Proprietary algorithms provide enhanced first hour delivery ratings and tighter temperature differentials
- Microprocessor controls burner operation for consistent and accurate water temperature levels up to 160 deg F (71 deg C)
- Exclusive multi-color LED light indicates operation status/service required
- Designed to be the safest, most reliable flammable vapor ignition-resistant system in the industry with a proven track record since 2003
- Flame arrestor is designed to prevent ignition of flammable vapor outside of the water heater
- Proven and reliable bi-metallic switch prevents burner and pilot operation in case of ongoing flammable vapors burning inside of the combustion chamber or restricted air flow
- No regular cleaning of air inlet openings or flame arrestor is required under normal conditions
- Offers a view into the combustion chamber to observe the operation of the pilot and burner
- An exclusively engineered enamel formula that provides superior tank protection from the corrosive effects of water and with Microban® antimicrobial product protection to help prevent the growth of bacteria, mold and mildew on the surface of the tank lining
- Sediment reducing device that also increases first hour rating of hot water while minimizing temperature build-up in tank
- NPT factory installed dielectric waterway with heat traps
- Provides added protection against corrosion for long-term, trouble-free service
- Durable tamper-proof design
Item Attributes
| Brand Code: | Bradford White |
|---|---|
| Part Number: | RG250T6X |
| GTIN14: | 671632794645 |
| Category Code: | Water Heaters |
| Sub Category Code: | Water Heaters |





